Operator Controls; Temperature Control - Uline H-951 Manual Del Usuario

Ocultar thumbs Ver también para H-951:

Manual de instrucciones (22 páginas)

Contenido

Tabla de contenido

Idiomas disponibles

Power Switch

1. Cut the two strappings from rollers prior to first use.

2. Turn power switch on. This starts machine and cooling fan.

3. Turn heater switch on. This starts the blower, conveyor motors and heater.

4. Set conveyor speed. Set the conveyor knob between 1 and 3 until user determines the exact conveyor speed

needed, based on package size and sealer speed. Factory setting is 2.

5. Set shrink temperature. Use the temperature control to set desired temperature. Adjust the temperature higher or

lower as needed. Machine requires about 30 minutes to reach the set temperature. Factory setting is 325ºF.

NOTE: The appropriate conveyor speed and heat setting for shrink wrapping your product will vary based

on type, thickness and brand of shrink film. We recommend shrink wrapping with the manufacturer settings

first and adjusting to suit needs.

CAUTION! When turning the tunnel off, remember to turn off heater switch FIRST. The tunnel automatically

shuts off at about 180ºF. Then user can turn the power switch OFF.

1. PV (Present Value) = Shows current operating

temperature of the machine.

2. SV (Set Value) = Shows the temperature you set for the

machine.

Moves indicator on SV display so you can set the

temperature.

and

adjust the number up or down

Set button selects the temperature as the set

SET

value.

TO ADJUST THE SET TEMPERATURE:

1. Press the

key. SV display flashes in 1st column.

While number is flashing, use the

your first desired number

2. Press the

key to move the indicator 1 place to

the left. While number is flashing, use the

keys to your second desired number.

PAGE 2 OF 21