Tabla de contenido
Appendices
31.2.3
Step 3: Configure Channel Functions and Features
Intensity
1.
Select the Function cell for channel 1 and press
with a list of function categories.
2.
Select Intensity on the left column to display a list of Intensity function
sub-categories.
3.
Select Intensity as the desired function. The window will close and you
will see intensity assigned as the function and feature for channel 1.
Note that the feature column will auto-fill with 'Intensity'.
4.
Select the DMX value cell for channel 1 and press
values range for the intensity channel (0>255) and press
5.
Select the Real World value cell for channel 1 and press
Real World value to be displayed in percentage (0>100) and press
Pan and Tilt (16 bit)
Define 16 bit channels for Pan and Tilt:
1.
Select the channel cell for Channel 2 and press
that channels 2 and 3 combine to create a single 16-bit fixture.
2.
Select the channel cell for Channel 3 and press
that channels 2 and 3 combine to create a single 16-bit fixture.
3.
Repeat the above for channels 4 and 5.
Configure Pan and Tilt Functions:
1.
Select the function cell for the first 2/3 channel and press
will appear with a list of function categories.
2.
Select Position on the left column to display a list of Position function
sub-categories.
350
Capítulo 31: El Creador de Aparatos (Fixture Builder)
. A dialog will appear
Set
. Enter 2/3 to indicate
Set
. Enter 2/3 to indicate
Set
. Enter the DMX
Set
.
Enter
. Enter the
Set
.
Enter
. A dialog
Set
Flying Pig Systems
Tabla de contenido
Solución de problemas
