Brizo Sensori T66T0 Serie Manual De Instrucciones

Ocultar thumbs Ver también para Sensori T66T0 Serie:
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

T66T0_______
Register Online
www.brizo.com/customer-support/product-registration
To reference replacement parts and access additional
technical documents and product info, visit www.brizo.com
?
1-877-345-BRIZO (2749)
Read all instructions prior to installation.
Failure to read these instructions prior to installation may result in personal
injury, property damage, or product failure. Manufacturer assumes no
responsibility for product failure due to improper installation.
You may need:
CAUTION: This system/device must be set by the
installer to ensure safe, maximum temperature.
Any change in the setting may raise the discharge
temperature above the limit considered safe and
may lead to hot water burns.
NOTICE TO INSTALLER: CAUTION!–As the
installer of this valve, it is your responsibility
to properly INSTALL and ADJUST this valve
per the instructions given. This valve does
not automatically adjust for inlet temperature
changes, therefore, someone must make the
necessary temperature knob adjustments at
the time of installation and further adjustments
may be necessary due to seasonal water
temperature change. YOU MUST inform the
owner/user of this requirement by following the
instructions. If you or the owner/user are unsure
how to properly make these adjustments, please
refer to page 4 and if still uncertain, call us at
1-877-345-BRIZO (2749).
After installation and adjustment, you must affix
your name, company name and the date you
adjusted the temperature knob to the caution label
!
CAUTION
!
Sensori
Thermostatic
®
Valve Trim
T E FLO N
provided and apply or attach the label to the back
side of the closest cabinet door and the warning
label to the water heater. Leave this Instruction
Sheet for the owner's/user's reference.
WARNING: This thermostatic bath valve is
designed to minimize the effects of outlet water
temperature changes due to inlet pressure and
temperature changes, commonly caused by
dishwashers, washing machines, toilets and
the like. It may not provide protection from hot
water burns when there is a failure of other
temperature controlling devices elsewhere
in the plumbing system, if the temperature
knob is not properly set or if the hot water
temperature is changed after the settings
are made or if the water inlet changes due to
seasonal changes.
WARNING: Do not install a shut-off device on
either outlet of this valve. When this type of
device shuts off the water flow, it can defeat
the ability of the valve to balance the hot and
cold water pressures.
1
3/32"
(2.38mm)
8/8/19 Rev. C
Tabla de contenido
loading

Resumen de contenidos para Brizo Sensori T66T0 Serie

  • Página 7: Accesorio De La Válvula Termostática Sensori

    Página 4 y si todavía no está seguro, ajuste de la temperatura no está apropiadamente fijo o llámenos al 1-877-345-BRIZO (2749). si cambia la temperatura del agua caliente después de hacer los ajustes o si los cambios del agua de entrada son por los cambios estacionales.
  • Página 8 El comprobante de compra (recibo de venta original) del comprador original debe estar disponible a Brizo Kitchen & Bath Company para todos los reclamos de garantía a menos que el comprador haya registrado el producto con Brizo Kitchen & Bath Company. Esta garantía se aplica solo a las llaves de agua Brizo®...
  • Página 9 R66000-WS Nota: la tubería preliminary de la válvula Ubique la “V” (1) en la manga del cartucho termostática Sensori® (R66000-WS) debe y la muesca “V” (2) en el cuerpo de la vál- instalarse antes de instalar los accesorios. vula (3). Alinee que correspondan las “Vs” unas con las otras y presione la manga y Cierre los suministros de agua de para- el ensamble del cartucho (4) en el cuerpo...
  • Página 10 IMPORTANTE: la espiga y gire la manija en dirección contraria a la de las El Tope del Límite Rotacional se usa para limitar manecillas del reloj hasta que la manija pare. la cantidad de agua caliente disponible de manera • Coloque el termómetro en un vaso plástico y sosténgalo que, si ajustado apropiadamente, el usuario no se bajo el chorro de agua.
  • Página 11 Kit opcional de la extensión - RP72604 chapa y presione la manija en la espiga de la válvula. Deslice el aro-O (1) sobre el cartucho y la Fije la manija con el tornillo proporcionado y coloque tuerca tapa (2). El aro-O que funciona como otra vez el botón presionándolo sobre la tapa de la un separador para estabilizar la manga, manija.
  • Página 12: Mantenimiento

    Mantenimiento Limpieza Y Cuidado De Su Llave Si nota el flujo de agua reducido o que la temperatura del agua de salida fluctúa, los Tenga cuidado al ir a limpiar este producto. filtros o telas metálicas del cartucho necesitan Aunque su acabado es sumamente durable, limpiarse.
  • Página 19 Notes / Notas / Notes 102224 Rev. C...
  • Página 20 Notes / Notas / Notes 102224 Rev. C...

Tabla de contenido