Advice On Disposal - UFESA PA7000 Manual De Instrucciones

After working with grinder
● Turn the appliance off and remove the plug from the
wall outlet.
● Remove the grinder, to his end hold the base for
accessories with one hand and use other hand to catch
the grinder. Turn the grinder counter-clockwise until it
reaches the end stop and take it off from the base for
accessories.
● Turn the grinder upside down (the base to the top).
● Turn the grinder base with a set of blades in
a counter-clockwise direction and remove the base
with the set of blades from the grinder' s cover.
● Pour the ground contents into the dish.
● Clean the grinder (see section "Cleaning and
maintenance of appliance with installed mixing cup
(liquidizer) / grinder").
Cleaning and maintenance of appliance
with installed mixing cup (liquidizer) /
grinder
Cleaning the appliance must be followed
immediately after use. This will prevent
leftovers build-up inside jug of the blender.
● Pour about 450 ml of water into the jug and run the
appliance for about 10 seconds by turning and holding
the control knob to "PULSE".
● Then pour out the water from the jug, turn it upside
down and dry.
● If necessary, wash the jug, the cover and cover cap,
a set of blades, grinder container and grinder base with
a set of blades with hot water plus dishwashing liquid.
● Wipe the gasket seal of mixing cup and grinder seal
with a damp cloth.
● Then rinse it in clean running water and dry.
● If you left the jug for a long time without cleaning
and the pieces of mixed ingredients stuck to the inside
of the jug, use a nylon brush for cleaning.
● We do not recommend putting the jug, the cover
and cover cap, the grinder, the set of blades, grinder
container and grinder base with a set of blades
into a dishwasher. Aggressive cleaning agents may
adversely affect the surface condition of the appliance.
● Wipe the outside of the drive with a damp and soft
cloth.
Do not put the drive unit into water or
other liquid.
● To clean the drive unit do not use aggressive and
abrasive detergents such as emulsions, cleaning creams,
pastes, etc. They may remove the graphic symbols.
● Do not clean the jug and grinder container with
abrasive sponges or rags.
● Dry thoroughly all parts of the appliance.

Advice on disposal

Our goods come in optimised packaging. This
basically consists in using non-contaminating
materials which should be handed over to the local
waste disposal service as secondary raw materials.
This product complies with EU Directive
2002/96/EC. The crossed wheelie bin
symbol shown on the appliance indicates that
when it comes to dispose of the product it
must not be included in with household refuse. It must
be taken to a special refuse collection point for electric
and electronic appliances or returned to the distributor
when purchasing a similar appliance. Under current
refuse disposal regulations, users who fail to take
discarded appliances to special refuse collection points
may be penalised. Correct disposal of discarded
appliances means that they can be recycled and
processed ecologically, helping the environment and
allowing materials used in the product to be reused. For
more information on available waste disposal schemes
contact your local refuse service or the shop where the
product was purchased. Manufacturers and importers
are responsible for ecological recycling, processing and
disposal of products, whether directly or via a public
system.
Your local town council can provide you with information
about how to dispose of obsolete appliances.
The manufacturer/importer does not accept any liability for any
damages resulting from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the
product any time in order to adjust it to law regulations, norms,
directives, or due to construction, trade, aesthetic or other
reasons, without notifying in advance.