Characteristics Of The Appliance; Preparing The Appliance For Operation - UFESA PA7000 Manual De Instrucciones

Blender elements
26
The gear (transmission)
27
The food processor container
28
The double-sided disc
29 The food processor blade
30
The cover of food processor
31
The pusher of food processor
FOOD PROCESSOR (BLENDER)

Characteristics of the appliance

Blender is designed to perform operations to prepare
meals. Interchangeable equipment (a blade of food
processor, double-sided disc) allows for chopping,
cutting, mixing dough and chopping vegetables.
Application of accessories
Food processor blade – is used for the processing
of raw or cooked meat. You can also use it to mix the
dough (cake batter).
Double-sided disc
– A side applicable to making the slices – can be used
to cut into slices.
– A side for making the chips - can be used for cutting
/ grinding into chips.

Preparing the appliance for operation

Before the first use of installed blender (or after storage
for a longer period of time), clean the food processor
elements (the pusher, the cover, the container, the blade
and double-sided disc) with hot water plus dishwashing
detergent, rinse well and dry these elements.
Maintenance and operation
1
Install the gear on the base for accessories, so that
the symbol on the gear is aligned with the symbol
on the base for accessories, and then lock the gear
by turning it clockwise to clockwise until it blocks; the
symbol on the gear is aligned with the symbol
on the base for accessories (the characteristic "click"
indicates that the gear is properly installed).
2
Fit the food processor container on the base for
accessories, so that the symbol
is aligned with the symbol
I
on the container
on the base for
accessories. Then press the container to the base for
the accessories and lock it by turning clockwise until
the lock; the symbol
with the symbol on the base for accessories (the
characteristic "click" indicates that the food processor
container is properly fitted).
The food processor container holder
should be placed on the right side of the
appliance.
Working with the blender's blade
1
Insert the food processor blade into container.
● Place the food in the container.
2
Place the food processor cover so that the pin on
the cover hit the hole in the blade and the symbol
on the cover is aligned with the symbol
container of food processor.
3
Tighten the food processor cover to the container' s
flange and lock it by turning clockwise until the symbol
on the cover is aligned with the symbol
container.
● Insert the food processor pusher to the hopper of
food processor.
● Turn on the appliance by turning the control knob to
the desired position.
Do not use appliance with installed food
processor in continuous operation for
more than 30 seconds. After this time,
turn it off and wait 10 minutes before restarting,
allowing the engine to cool down.
4
While running the appliance you can add products
(spices, ingredients etc.) through the hopper after
removing the food processor pusher. Put the products
into hopper of the cover and if there is a need - gently
press them with pusher.
Do not push products with your fingers
or other objects.
● To stop the appliance, turn the speed control knob
to "0".
● Open the food processor (blender) in a manner
opposite to that described in paragraphs
on the container is aligned
on the
on the
3
and
K
2
.