Batteries; Setting The Camera's Mode - Olympus IMAGING PT-027 Manual De Instrucciones

5. Rough handling, such as jumping into the water with the case in
your hand or in an outside pocket or throwing the case into the
water, etc. could lead to water leakage. Please always take care
when using the case.
6. If the camera contained in the case becomes wet because of water
leakage, etc., immediately wipe off all moisture and check the
camera is working correctly.
7. Before travelling by air, please make sure you remove the O-ring,
otherwise the difference in air pressure may make it impossible to
open the case.
8. To ensure safe and trouble-free handling and operation of the
digital camera in this product, please read the camera's instruction
manual carefully.
9. When sealing this product, please take care to ensure no foreign
matter such as sand, dirt or hair are on the O-ring or contact
surfaces.

Batteries

● Use an exclusive lithium-ion battery (Olympus BLM-1) designed for
digital cameras.
● Keep the battery's contacts away from damp or humidity; otherwise
this could impair performance and/or cause accidents.
● For additional battery cautions, refer to your digital camera's
instruction manual.
● The separately available Power Battery Holder for the C-7070 Wide
Zoom/C-5060 Wide Zoom (B-HLD20) cannot be used with this
product.

Setting the camera's mode

When using the C-7070 Wide Zoom
● The C-7070 Wide Zoom camera includes scene modes expressly
configured to optimize wide-angle and macro shooting under
water. Select the mode according to the scene you want to shoot
under water.
For details, see "Underwater Shooting According to the Scene
Type" in this manual (page E-28).
● For details on mode setting, refer to the digital camera's operation
manual.
When using the C-5060 Wide Zoom
● When using this product, set the camera's mode dial to "P" and
use the menu button to select [Mode Menu] ➔ [Shooting] ➔
[Accessory] ➔ [
● For more information, see the camera's instruction manual.
].
E-3