Use And Operation - Klarstein 10029781 Manual Del Usuario

Installation Drawings for Models that use Lateral Condensation Cooling Mode

Use and Operation

Plug in and switch on the cellar by pressing on the power button for a few seconds. When you use the wine
cellar for the first time (or restart the wine cellar after having it shut off for a long time), there will be a few
degrees variance between the temperature you have selected and the one indicated on the LED readout.
This is normal and it is due to the length of the activation time. Once the wine cellar is running for a few hours
everything will stabilize.
Important: If the unit is unplugged, power is lost, or turned off, wait 3 to 5 minutes before restarting the unit.
The wine cellar will not start if you attempt to restart before this time delay.
Operating Noises
To reach the desired temperature settings, VINICOLE wine cellars, like all wine cellars operating with compres-
sors and fans, may produce the following types of noises. These noises are normal and may occur as follows:
• Gurgling sound - caused by the refrigerant flowing through the appliance' s coils.
• Cracking/popping sounds - resulting from the contraction and expansion of the refrigerant gas to produce cold.
• Fan operating sound - to circulate the air within the wine cellar.
15