Product Description; Use And Operation - Klarstein Beerlocker S Instrucciones De Uso

PRODUCT DESCRIPTION

1 Light switch
2 Control knob
3 Fan mask
4 Shelf
5 Foot
6 Water tray
7 Upper hinge
8 Upper cover
9 Door seal
10 Handle
1 1 Glass door
12 Lower hinge
13 Lower cover

USE AND OPERATION

Befor first Use
• Remove the exterior and interior packing
• Check to be sure all parts are included.
• Before connecting the appliance to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the
cooling system from handling during transportation.
• Leave 5 cm of space between the fridge and the wall on the sides. At the back, the
distance to the wall should be 10 cm.
• Clean the interior surface with lukewarm water using a soft cloth.
• Place your appliance on a floor that is strong enough to support the appliance
when it is fully loaded. To level your appliance, adjust the front legs at the bottom of
the appliance.
• For recedes installation away from direct sunlight and sources of heat (stove, heater,
radiator, etc.).Direct sunlight may affect the acrylic coating and heat sources may
increase electrical consumption. Extreme cold or hot ambient temperatures may
also cause the appliances not to perform properly.
• Not designed for placement in adage or basement.
• The appliance is for indoor use only.
• Caution: Please keep the appliance away from substance, which can cause
ignition.
EN
11