Use And Operation; Reversing The Door Swing - Klarstein 10031689 Manual De Instrucciones

USE AND OPERATION

1 Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth.
2 Clean the interior with a clean moist cloth.
3 Insert the power supply cord into the socket.
4 Tum the thermostat dial to „5" or „low".
5 Close the door and let the refrigerator and operate it emty for 1-2 hours, before
you store any food inside.
When use for the first time (or not use for a long time), you should adjust the temperature
to minimum and have the cabinet empty running for 2 hours, and then adjust to the
desired temperature. When you want to change the temperature in the cabinet, You
can make use of the temperature setting knob to set the temperature. The temperature
range is 5°C—12°C, after the temperature is set on one certain point and when the
temperature inside reaches this point, the automatic temperature control system
begin to work.

REVERSING THE DOOR SWING

This refrigerator has the capability of the door opening from either the left or right side.
The unit is delivered to you with the door opening from the left side. Should you desire to
reverse the opening direction, please call customer service for reversal instruction or the
chart following the installation of an adjustment
1 Pull out the cover and 4 pcs screws, see step 1 and 2.
2 Take out upper hinge, see step 3.
3 Pull out the other cover, see step 4.
4 Take out the whole door, see step 5.
5 Pull out the 4 pcs screw and take out the down hinge, see step 6 and 7.
6 Pull out the feet on anther side, see step 8.
7 Fix the down hinge into another side which pull out the feet by step 8;
8 Fix the whole door into the down hinge; then fix the upper hinge by
9 screws, and fix the cover.
EN
19