Changing Battery - Dentsply Maillefer X-SMART DUAL Manual Del Usuario

Changing Battery

The battery compartment is located at the bottom of the unit and its cover is
secured by a screw.

Turn off the power. Remove the AC adapter.

Release the screw and remove the battery compartment cover.

Remove the battery and disconnect the battery cable from the connector.

Insert the new battery cable into the connector. In case of difficult in inserting
the connector onto the battery, the polarity may be incorrect. Do not insert it
by force.

Close the battery compartment and secure it with the screw.

Ensure you charge the battery before use.
CAUTION: Use only original battery pack from your distributor.
2. Reloading factory default settings
Factory set programs can be restored in case difficulties arise with programming.

Turn the power off if the power is on.

Connect and confirm that the AC-IN lamp lights.

Hold down POWER, AUTOREV and MEMO buttons simultaneously for more
than one second.

Release the buttons once the LCD panel display indicates "SET" and then
press the MEMO button quickly while this display is still visible.

This process ends when the LCD panel display indicate "FIN".
NVG / F190294X / 06 / 2007 –updated 08/2009
- 21 / 148 -