Maintenance - Dentsply Maillefer X-SMART DUAL Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Handpiece dismantling
Remove the file.
Disconnect the motor handpiece from the unit.
Remove the contra angle from the motor handpiece by pulling it out axially.
Remove the connection part with contact fork by pulling it down and sliding it in the
direction of the arrow.
L.

Maintenance

1.
Changing the battery
The device uses rechargeable batteries. It can be recharged up to 500 times,
depending on the conditions of the motor handpiece.
If the operating time or recharging time becomes shorter or the rotation power
becomes weaker, the life of the battery is suspect.
In such a case, replace the battery. When replacing, be sure to observe the
following "
shall not be held liable for any malfunction or failure resulting from your not
following the "
CAUTIONS ON CHANGING THE BATTERY
Do not open any part other than the battery cover.
Be sure to purchase and use only the recommended battery. Otherwise,
battery may cause damage, fluid leakage or explode.
Do not work with wet hands. This may cause trouble due to short-circuiting of
the battery and moisture infiltrating the product.
NVG / F190294X / 06 / 2007 –updated 08/2009
CAUTIONS ON CHANGING BATTERY". Note that Dentsply Maillefer
CAUTIONS ON CHANGING BATTERY".
- 20 / 148 -
Tabla de contenido
loading

Este manual también es adecuado para:

X-smart dual s

Tabla de contenido