Check You Have Received; Exploded View; Tools & Other Items - Rutland FM910-4 El Manual Del Propietario

Rutland Furlmatic 910-4 Windcharger
1 x Main generator assembly
1 x Tail Fin
6 x aerofoil blades
24 x No. 0x25mm special self-
tapping screws
Exploded View of Rutland FM910-4
6 Blades with
24 Screws
Nose Cone
with 3 nylon
Screws
Tools That You Will Need:
• Suitable wire stripper
• Small terminal screwdriver
• Large flat blade screwdriver
• Crosshead screwdriver
• 10mm and 17mm Spanner
Other Items You May Have Selected from Marlec:
• A Rutland Charge Regulator - visit www.marlec.co.uk for current models
• Land Tower and Rigging Kit
• Cable
Doc No: SM-138 Iss. F 01.10.19
Generator
Hub
(Part Nos. CA-12/08 & CA-12/07)
2 x M10 hex head screws
2 x Tab washers
1 x 2-way terminal block
Nacelle Dome
Other Items You Will Need:
•Tower/Mounting pole
•Batteries
•Battery terminals
•Cable
•Connector blocks (as determined
by your total system)
6
Installation & Operation
Tail fin fixes
with 2 nuts
and bolts
Post Adaptor fixes
with 2 bolts and
tab washers
Marlec Eng Co Ltd