Check You Have Received - Rutland 914i Manual De Instrucciones

Rutland 914i Windcharger
The Rutland 914i Windcharger is suitable for use on board sailing boats. When
•
storm winds are forecast the turbine can be restrained to minimise wear and
tear. In particularly when boats are in dry dock the shutdown switch of the
selected charge regulator should be in the off to prevent the turbine from
turning at full speed.
If in doubt, refer to your dealer, a competent electrical engineer or the
•
manufacturer.
Check You Have Received - See Rutland 914i Exploded View
24 x No.10x25mm special self-tapping screws for aerofoil blades
•
1 x No.4 x 13mm self tapping screw for tail bracket covers
•
2 x M6 x 16mm Hex. Head screws for tail fin
•
2 x M6 nylock nuts for tail fin
•
1 x main generator assembly
•
6 x aerofoil blades
•
1 x tail fin
•
2 x tail bracket covers
•
1 x nose cone + 3 x nylon fixing screws
•
1 x 2-way terminal block
•
2 x M10 Hex Head Screws
•
2 x tab washers
•
In the event of loss or damage, consult your dealer or the manufacturer.
Doc No:SM-137 Iss. E 11.03.19 6
Installation & Operation
Marlec Eng Co Ltd