Important Notes Of Camera Installation - Reolink Argus PT Instrucciones De Operación

• In Different Network (In WAN)
1. Click "Add Device" on the right-side menu.
2. Choose "UID" as the Register Mode.
3. Type in the UID of your camera.
4. Create a name for the camera displayed on Reolink Client.
5. Input the password created on Reolink App to log in.
6. Click "OK" to log in.
7 English
NOTICE: To save power, the
camera will log out if no
operation is conducted for
about 5 minutes. You need to
log in the camera again by
clicking the " " button.

Important Notes of Camera Installation

For outdoor use, please install the Argus PT upside down in order to maximize
the waterproof performance and the PIR motion sensor's efficiency.
For indoor use, the camera can be placed upright, but please make
sure to place it at a maximum of 2.5 meters from the ground.
• PIR Sensor Detecting Distance
The PIR senor has 3 sensitivity levels for your adjustment: Low/Mid/High.
Higher sensitivity offers longer detecting distance. The default sensitivity of the PIR sensor is at
"Mid".
Detecting Distance
Sensitivity Value
(For moving and living things)
Low 0 - 50 Up to 5 meters (16ft)
Mid 51 - 80 Up to 8 meters (26ft)
High 81 - 100 Up to 10 meters (33ft)
NOTICE: The path to adjust the sensitivity level on Reolink App: Device settings-PIR settings
Detecting Distance
(For moving vehicles)
Up to 10 meters (33ft)
Up to 12 meters (40ft)
Up to 16 meters (52ft)
English 8