Stage And Stage Inserts - Optika Italy IM Serie Manual De Instrucciones

LIGHT PATH LEVER
In
Out
LIGHT PATH LEVER
In
Out
9.8

Stage and stage inserts

• For the best image quality, use flasks, Petri dishes
and slides with a 1.2 mm thickness.
1. Place the proper insert for your specimen (according to
the table on the right) on the stage, and fix it with the
stage clip.
2. Turning the X and Y knobs, move the specimen to the
required position. (Movement Range: 120 (width) × 78
(length) mm).
Moving the specimen
Move the specimen to the desired position by freehand or
by turning the knobs ① of the mechanical stage. (Fig. 39)
• When switching objectives, take care not to touch
the holder plates with the objectives, as their weight
may damage the front lens.
50% used for binocular observation /
50% used for video or photography
100% used for binocular observation /
0% used for video or photography
IM-3F / IM-3FL4 / IM-3LD2 / IM-3LD4 / IM-3LD4D
0% used for binocular observation /
100% used for video or photography
100% used for binocular observation /
0% used for video or photography
M-793.1 Holder for Petri diameter 38 mm (holder for Terasaki needed) (provided with the
microscope)
M-793.2 Holder for Terasaki and Petri diameter 65 mm (provided with the microscope)
M-793.3 Holder for slide and Petri diameter 54 mm (provided with the microscope)
M-793.4 Holder for 2+2 slides
M-793.6 Holder for Utermöhl-Chamber (holder for Petri diameter 54 mm needed)
M-793.7 Load-bearing side extension
IM-3
BRIGHTNESS
BRIGHTNESS
Page 29
APPLICATION
Binocular observation and microgra-
phy or video can be operated simul-
taneously
Binocular observation
APPLICATION
Microphotography or video acquisi-
tion
Binocular observation
①
F ig. 39 F ig. 39