Fitting Or Removing The Stand - Toshiba 24D153DG Serie Manual Del Usuario

Fitting or Removing the stand

Fitting or Removing the stand
(1) Carefully lay the front of the unit face down on a flat, cushioned surface with the stand hanging over the edge.
(2) To fit the stand use the screws supplied.
or
(3) Remove the screws fixing the stand
(4) After the screws are removed, hold the TV and pull out the stand by applying a firm outwards pull from
the TV to remove the stand.
Note: Extreme care should always be used when removing the stand to avoid damage to the LCD panel.
For 24D153*DG / 24W153*DG model
When using a Wall Bracket
Please use a wall bracket appropriate for the size and weight of the LCD TV and two people are required for
the installation.
(1) Unplug and remove any cables and/or other component connectors from the rear of the TV.
(2) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket.
(3) Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate
bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the
wall bracket.
English - 5 -