How To Watch A Dvd; Notes On Dvd Playback - Toshiba 24D153DG Serie Manual Del Usuario

How to watch a DVD

Note: DVD mode cannot be accessed unless a DVD is
inserted or a DVD control button is pressed.
If you switch to another source by pressing
"SOURCE - ", "SWAP -
buttons on the remote control, DVD playback will
be paused automatically. You should press PLAY
and resume the playback manually when you switch
to DVD mode.
1. Switch on the TV.
2. Switch to DVD source using the "SOURCE -
" button on the remote control.
3. Insert a disc into the loader.
The labelled side of the disc MUST be facing you
when looking at the TV screen.
Most discs will be automatically loaded and play will
start automatically if the disc does not have any menus
recorded on it.
If play does not start automatically, press the play
button " " on the remote control, or the play button
" / " on the right side of the TV.
A menu may appear on the TV screen after a few
moments or the film may start immediately after the
Film/TV Company introduction. This will depend on
the disc content and may differ on each disc.
Note: Steps 4 and 5 are only available when a menu is
recorded on the disc.
4. Press the navigation buttons "
or the number button/s to select the required title.
5. Press the OK button. The selected item starts to
play.
DVD Mode
General Operation
a. No sound will be heard during Rapid advance or
b. No sound will be heard during Slow motion play.
" or "P / "
c. Reverse Slow motion play is not available.
d. In some cases, the subtitle language will not be
e. When the preferred language will not select, even
f. When the DVD player is restarted or the disc is
g. If a language is selected that is not supported by
h. Usually a 'circulation' will happen while switching
i. When the power is turned on or the disc is
j. Some DVDs may not contain root and/or title
k. Reverse stepping is not available.
l. For reference: If you attempt to enter a number
m. The slide show is disabled when the ZOOM mode
", " ", " " or " "
English - 14 -

Notes on DVD Playback

Rapid reverse.
changed immediately to the selected one.
after pressing the button several times, it means
the language is not available on the disc.
changed, the subtitle selection is automatically
changed back to the initial settings.
the disc, the subtitle language will automatically
be set to the disc's priority (default) language.
to another language, this means you can cancel
the subtitle by pressing the same button a number
of times until "Subtitle Off" appears on the screen.
removed, the language heard will be the one
selected at the initial settings.
menus.
greater than the total time of the current title, the
time search box disappears and "Input Invalid -
" message appears on top-left corner of screen.
is on.