Care Of The Machine - Nogueira Tn-10 Manual De Instrucciones

2) Lubrication:
Lubrication is the most important maintenance of your machine by following these instructions for
lubrication, the user will greatly reduce the chance of breaking your machine. We recommend that
you lubricate every 5 hours of use for greading the PTO shaft pulley "A" (fig.08), and the rotor shaft
grease fittings "C" (fig.09), lubricate the with grease type GMA-2 using a manual grease, pumping it
two to three times per application.
8
A
Extra care:
Remember, before starting the lubrication, you should verify that the grease fittings are clean. It is
important to clean them before you start lubrication in order to prevent the entry of foreign matter
(dust, particles of grass) in the bearings, these foreign bodies can damage them causing them to
lose their ability to work. It should also be attentive put the amount of grease in the bearings, grease
too much cause overheating and subsequent damage to the bearing finally remember that you
should not mix different brands of grease, so that it does not lose its original characteristics.

Care of the machine

To safeguard your machine, you should always keep in mind:
1) At the end of use of the machine, clean it and greasing it before storing it.
2) Keep it protected from weather time.
3) Try to make periodic reviews on your machine.
18
Operation Technical Manual
9
C