Using Your Blood Pressure Monitor For The First Time; Inserting The Batteries; Power Switch - Microlife BP3GT1-6X Manual De Instrucciones

b) Wide Range Cuff:
For arm circumference 22 cm-46 cm (8.7" - 18.1")
If you ever need to buy a replacement cuff, call blood
pressure support toll-free at 1-800-568-4147.
Please Note:
Arm circumference should be measured with a measuring tape in the middle of the
relaxed upper arm. Do not force cuff connection into the opening. Make sure the cuff
connection is not pushed into the AC adapter port. If the cuff is too small, call
1-800-568-4147 for further information. This unit will only work accurately with the
included cuff.

4. Using your blood pressure monitor for the first time

4.1. Inserting the batteries

After you have unpacked your device, insert the batteries.
The battery compartment is located on the bottom of the
device.
a) Remove the battery cover.
b) Insert the batteries (4 x size AAA 1.5 V), observing the
indicated polarity.
c) If a battery warning appears in the display, the batteries
are discharged and must be replaced.
Attention!
• After the low battery indicator appears, the device won't
function until the batteries have been replaced.
• Please use "AAA" Long-Life or Alkaline 1.5 V batteries.
• If the blood pressure monitor is not used for long
periods, remove the batteries from the device.

4.2. Power switch

To activate your monitor, push the switch on the right hand
side downwards to the unlock position.
Discharged
Battery
locked
unlocked
7