Preparation; Installation Instructions - Utilitech PPSP33 Manual Del Usuario

PREPARATION

WARNING: Always use handle to lift pump. Never use power cord to lift pump. To avoid
skin burns, unplug and allow time for the pump to cool after periods of extended use.
Estimated Assembly Time (New installation): 30 minutes (or longer if installing new sump
pit).
Materials Required for Assembly (not included): Flexible connector, Check valve, PVC pipe, PVC
elbow, Thread Tape, PVC Purple Primer, and PVC Cement
Tools Required for Assembly (not included): Wrench, Phillips screwdriver
The pump should rest on a level, solid base.
 Do not suspend the pump by the discharge hose or power cord.
 Keep the pump inlet screen clear.
 Do not install pump directly on sand or dirt.

INSTALLATION INSTRUCTIONS

1. Normal discharge for this pump (A) is 1-1/2 in. However,
if existing 1-1/4 in. discharge pipe is already in place,
wrap the threads of the 1-1/4 in. adaptor (included) with
thread tape and thread into pump discharge.
2. Install a sump pump check valve (sold separately) into the
pump (A).
5