Bestway Lay-Z-Spa Manual Del Usuario página 18

Draining the Spa
NOTE:
Drawings for illustration purposes only. May not reflect actual product. Not to scale.
1.
4.
7.
Cleaning the spa
NOTE: DO NOT use hard brushes or abrasive cleaners.
DEFLATION
HYDROJET PRO
Spa Repair
For Spa inflatable cover
If the spa is torn or punctured, use the provided heavy-duty
repair patch.
1. Clean area to be repaired.
2. Carefully peel patch.
3. Press patch over area to be repaired.
4. Wait 30 minutes before inflation.
303021213751_14x21cm_54138;54173_欧规HydroJet SPA说明书_英
2.
5.
8.
Detergent residues and dissolved solids from bathing suits and chemicals may build
up on the spa walls. Use soap and water to clean the walls and rinse thoroughly.
P61726ASS18
P61725ASS18
P61726ASS18
For Spa Liner
If the spa is torn or punctured, use the provided PVC repair patch and glue (not
included) following these steps:
1. Clean and dry the area to be repaired.
2. Cut the provided PVC patch to appropriate size.
3. Use glue (not included) to coat the one side of the newly cut patch. Make sure the
4. Wait for 30 seconds and then place the cut patch with glue over the damaged area.
5. Smooth out any bubbles of air that may be trapped underneath, and press firmly for
6. Wait 30 minutes before inflation.
7. The product is once again ready for use. Repeat this process should further leaks
3.
P6H565ASS16
6.
9.
P61725ASS18
glue is evenly distributed.
two minutes.
occur.
10 18
NOTE: Lift up the spa when
there is only a little water left.
Damages to the handles are
not covered under the warranty.
P61727ASS18
Cover