Bestway LAY-Z-SPA Manual De Instrucciones

The Comfortable, Affordable, Go-Anywhere Spa!
1
The Lay-Z-Spa™ should not
be setup or left out in
temperatures lower than
11
operation
After 72 hours of
the pump will hibernate and "END"
will be display on the LED. When the pump is
hibernating both the rapid heating and water
filtration functions are disabled. To re-active
the pump simply press any button on the
control panel.
10
All Spas require the use
of chemicals in order to
keep the water clear and
safe.
™
™
RESET
TEST
2
The PRCD must be tested before
each use.
12
13
This unit will auto lockout after
We recommend you take a shower
5 minutes of inactivity.
before using your Lay-Z-Spa, as
To simply place a finger
cosmetic products, lotions, and other
over function button
residues on the skin can quickly
for 3 seconds.
9 9 9
If the pump not heating properly,
please press the thermal cut-out
manual "Reset" button on
the pump.
Congratulations on the purchase of your new Lay-Z-Spa™.
Before operating the Lay-Z-Spa™ be sure to follow these 14
steps. Damage resulting from misuse is not covered by the
manufacturer's warranty.
MAX
MIN
Water
3 3 3 3
Level
4
maximum and minimum
printed on the SPA wall.
14
degrade water quality.
8
regularly
Remove Stopper Caps
Ensure water is circulating between between
the Spa and the Pump and that the that the
Stopper Caps have been een
removed.
5 5 5
Be sure to set your desired
6 6 6 6
Check and ensure the Spa and Che
a adapters are not leaking.
7
Cartridge regularly.
temperature.
1