Charging; Reset Mode; Auto Power Off - Monster FLEX-ANC Manual De Instrucciones

CHARGING

New headphones will have enough power for pairing and
dialing out but need to be fully charged to use for a
prolong time. The RED LED will flash quickly when in low
battery, Red LED will blink while charging, Red LED will turn
solid after fully charged; 2-3 hours are needed for a
fully charged battery.
RESET MODE FOR HARDWARE RESET
Connect the headphones to the computer via Micro
USB cable. When red LED light flashes, headphones reset is
finished.
AUTO POWER OFF TO SAVE BATTERY IN BATTERY MODE
1. If the FLEX is on and has no action within 15
minutes, the FLEX unit will auto power off to save battery.
2. If the FLEX is on and Bluetooth has disconnected over 15
minutes; the FLEX will auto power off to save battery.
3. The FLEX will power off to charge when power cable is
connected.
Remarks: The FLEX can auto power off if Bluetooth is connected and battery is too low