Set The Wireless Network Connection Manually - Yamaha R-N803 Manual De Instrucciones

Connecting to network
Set the wireless network connection
manually
Before performing the following procedure, check the
security method and security key on the wireless router
(access point).
MEMORY
Cursor keys
B / C / D / E
ENTER
HOME
SETUP
SETUP
NOW PLAYING
1
Press SETUP.
2
Use the cursor keys (B / C) to select
"Network " and press ENTER.
Note
To return to the previous state, press RETURN.
3
Use the cursor keys (B / C) to select
"Connection" and press ENTER.
4
Use the cursor keys (B / C) to select
"Wireless" and press ENTER.
5
Use the cursor keys (B / C) to select "Manual
Setting" and press ENTER.
MANUAL
SSID
6
Use the cursor keys (B / C) to select "SSID"
and press ENTER.
SSID
7
Use the cursor keys to enter the SSID on the
wireless router (access point), and press
RETURN to previous state.
Use the cursor keys (D/E) to move the edit position
and the cursor keys (B/C) to select a character.
Press PRESET i to insert a character and PRESET j
to delete.
8
Use the cursor keys (B / C) to select
"Security" and press ENTER.
SECURITY
WPA2-PSK(AES)
18
En
PRESET PRESET j / i
ENTER
RETURN
RETURN
OPTION
VOLUME
MUTE
9
Use the cursor keys (D / E) to select desired
security method and press RETURN.
Settings
None, WEP, WPA2-PSK (AES), Mixed Mode
Note
If you select "None", the connection may be insecure since the
communication is not encrypted.
10
Use the cursor keys (B / C) to select
"Security Key" and press ENTER.
KEY
11
Use the cursor keys to enter the security key
on the wireless router (access point), and
press RETURN to previous state.
If you select "WEP" in step 9, enter either 5 or 13
character string, or 10 or 26 hexadecimal digits.
If you select "WPA2-PSK (AES)" or "Mixed Mode"
in step 9, enter 8 to 63 character string or 64
hexadecimal digits.
Use the cursor keys (D/E) to move the edit position
and the cursor keys (B/C) to select a character.
Press PRESET i to insert a character and PRESET j
to delete.
12
Use the cursor keys (B / C) to select
"Connect[ENTER]" and press ENTER to save
the setting.
If the wireless network connection cannot be made,
the SSID or security key may be incorrect. Repeat
from Step 6.
You can verify whether the unit is connected to a
wireless network (p. 20).
13
To exit from the menu, press SETUP.