Analysis And Problems Solving; Problem, Causes And Solutions; Adjustments And Components Replacement - Skymsen DAL-06 Manual De Instrucciones

Ocultar thumbs Ver también para DAL-06:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

5. Analysis and Problems Solving

5.1 Problem, causes and solutions

The appliances were designed to operate with the need of minimum maintenance
but the natural wearing caused by longer use of the equipment may occasionally
cause some malfunctions.
If any problem occurs with your equipment, the most common situations are lis-
ted below with recommended solutions.

5.2 Adjustments and components replacement

The Disc # 07 (Pic.01) is coated with ALUMINIUM OXIDE, responsible to wear the potatoes
peel. After some time the Aluminium Oxide will be worn out and therefore the machine
efficiency will drop.
Whenever it happens take the disc to Technical Assistance to renew the coat.
PROBLEM
- The machine does not start.
- Burnt smell or smoke.
The machine starts, but when
the product is placed on the
Disc, the Disc stops or turns
slowly.
- Damaged Cord.
- Abnormal Noises.
TABLE 02
CAUSE
- Electric energy shortage.
- Problem with the internal or
external wiring.
- Problem with the internal or
external wiring.
- Belts sliding.
- Problem with the Electric
motor".
- Problem during transportation. - Call Technical Assistance.
- Problems with the bearings.
SOLUTION
- Check electric Energy source.
- Call Technical Assistance.
- Call Technical Assistance.
- Call Technical Assistance.
- Call Technical Assistance.
- Call Technical Assistance.
15

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Dal-06s

Tabla de contenido