Ceiling Fan Assembly - Luminance Brands Kathy Ireland Home DESIGNER CF755GRT06 El Manual Del Propietario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

3.1
Remove the Hanger Ball by loosening the Phillips Head
Set Screw in the Hanger Ball until the Ball falls freely
down the Downrod (Figure 1) .
Remove the Pin from the 3 .5" Downrod, then remove
the Hanger Ball (Figure 1) .
Retain the Pin and Hanger Ball for reinstallation in
Step 3 .8 .
NOTE: Do not loosen the Screw that attaches the
Green Ground Wire to the Hanger Ball.
3.2
Separate, untwist and unkink the Three 80" Motor
Wires .
Route the Three 80" Black, Blue, and White Motor
Wires through the 3 .5" Downrod (Figure 2) .

3. Ceiling Fan Assembly

PIN
PHILLIPS HEAD SET SCREW (LOOSENED)
Figure 1
THREE 80" MOTOR
THREE 80" MOTOR
WIRES (UNTWISTED)
LEADS (UNTWISTED)
Figure 2
Please contact 1-800-777-4440 for further assistance
5
GREEN GROUND WIRE
3.5" DOWNROD
HANGER BALL
3.5" DOWNROD
luminancebrands.com
U.L. Model No.: CF755
Tabla de contenido
loading

Tabla de contenido