Using Your Ceiling Fan - Luminance Brands Kathy Ireland Home DESIGNER CF755GRT06 El Manual Del Propietario

7.1
Restore Electrical Power to the Outlet Box by turning
the Electricity on at the Main Fuse Box or Circuit
Breaker Panel .
Check the operation of the Fan by gently pulling on the
Pull Chain Switch .
During Summer Months, run the Fan Counter-
Clockwise, as you look up at it, to direct airflow
downward .
During the Winter Months, run the Fan Clockwise,
as you look up at it, to direct airflow upward .
If airflow is desired in the opposite direction, turn the
Ceiling Fan OFF and wait for the Blades to stop turning .
Slide the Reverse Switch (located on the side of the
switch housing) to the opposite position, and turn the
Ceiling Fan on again (Figure 26) .
The Fan Blades will turn in the opposite direction and
reverse the airflow .
Reverse Switch Information
Season Blade Rotation Direction
Summer Counter-Clockwise
Winter Clockwise
7.2
Cut the 3-Speed Switch Pull Chain to a desired length
(optional) . Connect the Wood Pendant (supplied) to the
3-Speed Switch Pull Chain by sliding the Wooden
Pendant (small hole first) onto the Pull Chain
(Figure 27) . Attach the Chain Coupler to the end of the
Chain and allow the Wooden Pendant to fall down over
the Coupler .
Your Fan model is equipped with a 4-position,
3-Speed Pull Chain Switch (Figure 27) . The operating
sequence is as follows:
Three-Speed
1st Pull—HIGH
2nd Pull—Medium
3rd Pull—Low
4th Pull—OFF

7. Using Your Ceiling Fan

REVERSE
SWITCH
SWITCH
HOUSING
ASSEMBLY
Figure 26
3-SPEED
SWITCH
PULL CHAIN
WOODEN
PENDANT
COUPLER
Figure 27
Please contact 1-800-777-4440 for further assistance
17
luminancebrands.com
U.L. Model No.: CF755