SNOWJOE 24V-X2-SB18 Manual Del Operador página 10

Lithium-Ion Charging Status
Charger
Battery
Base
Pack
Indicator
Temperature
Light
Too hot
Green
Normal range Red
Too cold
Green
Assembly
Assembling the handles
1. For easy assembly, the unit comes complete with
most parts already connected. To complete the handle
assembly, simply pull the middle frame back and pull the
upper frame up (Fig. 5).
Fig. 5
Upper
frame
2. Secure the connection of the middle frame to the lower
frame by fastening the first set of knobs and bolts on each
side (Fig. 6).
Fig. 6
Battery
Pack Charging
Indicator Status
Light
Flashing
Not charging
together
Flashing Normal
one by one charging
Flashing
Not charging
together
Middle
frame
Lower
frame
Middle
frame
Knob + bolt
Lower frame
3. Secure the connection of the upper frame to the middle
frame by fastening the second set knobs and bolts on
each side (Fig. 7).
Fig. 7
Middle frame
Discharge Chute Assembly
1. Loosen the chute deflector knob to lift the chute deflector
(Fig. 8).
Fig. 8
Chute deflector knob
Chute
deflector
2. Lift the chute deflector and lock it securely onto the
discharge chute (Fig. 9).
Fig. 9
Chute
deflector
3. Raise or lower the chute deflector to the desired height of
the snow stream and tighten the chute deflector knob
(Fig. 9).
NOTE: Do not overtighten the chute deflector knob.
10
Upper
frame
Knob +
T-bolt
Chute
deflector
knob