Using The Visor Clip; Aura Mobile Bt™ And Voip; Using The External Microphone - Spracht AURA MOBILE BT Guia Del Usuario

User Guide

13. Using The Visor Clip

Visor Clip
• To attach to car visor, open the visor clip under the Aura
Mobile BT™ and slide it onto visor with the speaker facing
down, towards you.
• The Aura Mobile BT™ functions best when there are no
obstructions between the Aura Mobile BT™ and your
mobile phone.
14. Aura Mobile BT™ and VoIP
The Aura Mobile BT™ allows VoIP functionality. In order
to use this feature, you must already have VoIP through a
service provider. To connect your Aura Mobile BT™ with a
non-Bluetooth® computer for VoIP conferencing:
• Press and hold the Power button
until a chime sounds and the "Status" light flashes green.
• Connect the green headphone plug into the headphone
jack (typically green) on your computer.
• Connect the pink microphone plug into the microphone
jack (typically pink) on your computer.
• Connect the black plug into the "Line" jack on the Aura
Mobile BT™.
• Launch your VoIP application to make the call.
To connect your Aura Mobile BT™ with a Bluetooth®
capable computer for VoIP calls:
10
Sun Visor
�
on the Aura Mobile BT™
End View of Aura Mobile BT
Line
Headphones
• Press and hold the Power button
chime sounds and the "Status" light flashes green.
• Press and hold the Mode button
until the "Bluetooth®" indicator flashes both blue and amber.
button
• Launch your computer's Bluetooth® application. (Refer to your
Bluetooth® application's manual for detailed instructions of the
next steps.)
• Discover device: Navigate to "Discover" new devices. The
Bluetooth® application should find the Aura Mobile BT™ which is
displayed as "BTHS".
• Pair: Navigate to "Pair" with the "BTHS". Enter 0000 for the PIN.
• Connect: Navigate to "Connect" to the "BTHS".
• The incoming call chime will sound on the Aura Mobile BT™.
• Press the Mode button to connect.
• Your Aura Mobile BT™ will now act as your computer speakers and
mic. Launch your VoIP application to make the call.
Note: Typically, the call is placed using your computer's keyboard or
mouse to dial. The call is then routed through your Internet connection.
Once the call is dialed and placed, you will be able to hear and talk
through the Aura Mobile BT™.

15. Using the external microphone

Connect the external microphone plug into the "E. Mic" jack on the
Aura Mobile BT™. A tone will sound to indicate that the microphone
has been recognized. The external microphone will provide optimal
performance when placed 6" or more from your mouth.
User Guide
TM
Mic
�
on the Aura Mobile BT™ until a
. DO NOT release the Mode
11