What Is "Pairing; Making A Call; Receiving A Call; Adjusting The Volume - Spracht AURA MOBILE BT Guia Del Usuario

User Guide

3. What is "Pairing"

Pairing is the process of two Bluetooth® compatible
devices linking or communicating with one another.
A mobile phone identifies a Bluetooth® device and
uses a password or PIN to establish the pairing. This
process allows only a verified device to connect to
your mobile phone, ensuring security.
4. Pairing the Aura Mobile BT™ with a Mobile Phone
• Make sure that your Aura Mobile BT™ is powered
on. (see section 2)
• Power on your Bluetooth® enabled mobile phone.
• To switch to Bluetooth® mode and connect to a
Bluetooth® mobile phone, press and hold the
. DO NOT release the Mode
Mode button
button until the "Bluetooth" indicator flashes
both blue and amber. The Aura Mobile BT™ is now
ready for pairing.
NOTE: If no connection is established with a
Bluetooth® mobile phone within 60 seconds, the
Aura Mobile BT™ will switch to idle mode, signaled
by a flashing amber "Bluetooth" light. In this case,
you must hold the button for 3 seconds until the
"Bluetooth" light flashes blue and a tone sounds.
Next, hold the button once again until the
"Bluetooth" light flashes both blue and amber.
• Follow your mobile phone's instruction guide
to connect to a Bluetooth® device. Typically,
you will click on a Bluetooth® icon and click
"Discover device. "
6
• Your mobile phone should find the Aura Mobile BT™ which
is displayed as "BTHS".
• Click on "BTHS" and click "OK" if your phone prompts
you to confirm.
• Your mobile phone will then prompt you to enter a PIN or
password. Enter: 0000
• If the pairing is successful, your mobile phone will indicate
a successful pair and the "Bluetooth" indicator will flash a
blue light. The Aura Mobile BT™ is now ready to make or
answer calls.

5. Making a Call

• Dial the number on your mobile phone's keypad.
• Press the "Call" button on your mobile phone.

6. Receiving a Call

• A chime will sound on the Aura Mobile BT™ to indicate an
incoming call. Press the Mode button
Mobile BT™ or the "Accept" button on your mobile phone to
answer the call.
Note : Some mobile phones do not support accepting calls by
pressing the Mode button on your Aura Mobile BT™. In this
case, you must accept the call using your mobile phone.

7. Adjusting the Volume

> Volume Up: Press the Volume Up button
the volume.
• The "Status" indicator will flash and a tone will sound when
the maximum level has been reached.
< Volume Down: Press the "Volume Down" button
lower the volume.
User Guide
on your Aura
to increase
to
7