Start-Up; Temperature Adjustment; Selection Of The Different Types Of Fabric - Domus DMP30136 Manual De Uso Y Mantenimiento

If the machine has reached the programmed temperature, the plate is closed and for whatever reason
(power cut, etc.) the machine stops, the plate has to be URGENTLY separated from the roller to prevent
the material that is being ironed from being damaged and on the roller coating. To do so, proceed as
explained in the previous point but turn the Allen wrench anticlockwise.
4.3.

Start-up.

Power up the machine activating the main switch on the back of the right cabinet of the machine.
The led that indicates that the machine is receiving power will light up on the control panel. The
temperature display will light up when the start button is pressed.
4.4.

Temperature adjustment.

The control panel has three buttons that allow adjusting the temperature: "SELECT, INCREASE  and
DECREASE ". In normal conditions this indicates the real temperature of the heating plate. The
SELECT button displays the programmed temperature.
4.5.

Selection of the different types of fabric.

Select the clothes to be ironed, dividing them according to their composition and start ironing the clothes
that require lower temperatures, to then pass onto the ones that are more heat resistant, increasing the
temperature as necessary. This way you can start work as soon as possible and avoid the need for
waiting for the plate to cool down to pass onto ironing clothes that require lower temperatures.
The clothes to be ironed must contain a relative humidity of 5% to 10%.
A table indicating the right temperatures for different types of material is presented below:
MATERIAL
Perlon-artificial silk
Silk-wool
Cotton-linen
26
SYMBOL CONTENTS TEMPERATURE
low
·
medium
··
high
···
95 ºC
130 ºC
170 ºC