Telescopic Pole (Not Included) Assembly; Specific Telescopic Pole (Not Included) Assembly; Pool Preparation - Kokido EV80 Manual De Usuario

Telescopic pole (not included) assembly

Note:
1. A V-clip is installed inside the pole connector to secure the telescopic pole in position.
2. Make sure to assemble the handle. You need to hold it as well while putting the pool
vacuum into pool water or lifting it out of the pool.
Press the button of the V-clip to retract the side tabs and then slide the telescopic pole
onto the pole until the side holes of the telescopic pole match the side tabs. Release the
V-clip button and the telescope pole is secured to the pole connector.
To release the telescopic pole, press the V-clip button and pull the pole away from the
cleaner.

Specific Telescopic pole (not included) assembly

Insert the telescopic pole (with internal wishbone clip) to the pole connector as shown
until its small side pins are secured to the handle's locking holes.

Pool Preparation

- If there are stones, roots or metal corrosion in contact with the underside of the liner,
discard them prior to using the pool vacuum. If necessary, seek assistance from a
qualified professional.
- If the liner is brittle, damaged or wrinkled, contact a qualified professional to perform
the necessary repairs or perform a liner replacement prior to using the pool vacuum.
- If you are using a saltwater pool, make sure all salt are dissolved before placing the
pool vacuum into the water.
15