Tabla de contenido
Idiomas disponibles
Idiomas disponibles
-
Place the appliance on a stable, level surface. Make sure there is at least 35cm free space around
it to prevent overheating.
-
Do not use the appliance at room temperatures lower than 10°C or higher than 35°C.
-
Make sure the vents in the back of the appliance remain open during use.
-
The appliance is equipped with an automatic protection against overheating. If the appliance is
insufficiently cooled (e.g. because the cooling vents are covered), the appliance switches off
automatically. Unplug the appliance and remove the cause of overheating. Once the appliance
has cooled down, it can be switched on again. To do so, plug the appliance in again and press the
on/off switch.
-
To avoid getting your fingers stuck when you adjust the height, hold the lamp housing by one of
the handgrips or by the hinge as long as the height adjustment rings are unlocked.
-
Let the appliance cool down for approx. 15 minutes before you clean or store it.
-
If you have just been swimming or have just taken a shower, make sure you dry your skin
properly before you use this appliance.
-
To prevent eye damage, do not look into the light of the lamp when it is on. Keep your eyes
closed.
-
The filter and the parts directly around it become very hot when the appliance is switched on.
Do not touch them.
-
Never use the appliance when the filter is damaged, broken or missing.
-
Avoid too intense cooling of the body part immediately after treatment.
-
Do not fall asleep during treatment.
-
Painkillers reduce the sensitivity to heat. Do not use this appliance when you are on painkillers
without having consulted your doctor first.
-
If you suffer from a severe disease (e.g. diabetes, heart disease, acute inflammatory diseases,
multiple sclerosis, thrombosis, blood coagulation disorders) consult your doctor before use.
-
As a general rule, if you cannot stand a hot bath, do not use this appliance. If in doubt, consult
your doctor.
-
If you are oversensitive or insensitive to infrared light, be extra careful when you use this
appliance. If in doubt, consult your doctor.
-
Do not use the appliance if you have a swelling or an inflammation, as heat could aggravate the
complaints. If in doubt, consult your doctor.
-
If there is no improvement after 6-8 treatments, stop using the appliance and consult your
doctor.
-
To prevent overheating of the skin, avoid very short treatment distances.
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
using the appliance
the effect of the infraCare
The InfraCare produces infrared light, which penetrates deeply into the skin and warms the tissues.
Warmth modulates the neuronal signals to the brain and in this way reduces pain. Warming
stimulates the blood circulation and dilates the blood vessels, which accelerates the transport of
substances necessary to rebuild and nourish the body's tissues. Infrared light also speeds up the
metabolic process and the removal of waste substances from the body. Because it makes tissues
more pliable, warmth also reduces stiffness and makes joints more flexible.
Because of these effects, treatment with the InfraCare can relieve pain due to muscular and joint
problems.
EnglisH
7
Tabla de contenido
