Preparation Before Use; Operation; Powering Off And Storage - Logik L16VB10E Manual De Instrucciones

Preparation Before Use

GB
1. To connect the hose, insert the hose connector into the hose
connection opening until you hear 'click' sound.
2. To connect the telescopic tubes to the handgrip of the hose,
insert the narrow section into the wider section while turning
a little.
3. Extend the telescopic tube to a length you find the most
comfortable by pressing the button located on the
telescopic tube.
4. Connect a nozzle/brush suitable for the floor type to be
cleaned. The hard floor brush can be used with brush strips
lowered or raised. You may also connect the combination
nozzle to vacuum corners, slots or grooves. It can also be
used as a brush nozzle by turning the brush out in the
direction of the arrow.

Operation

1. Hold the mains plug and pull the retractable mains cable out of the vacuum cleaner. Connect it to the
mains socket. The YELLOW mark indicates the ideal length to extend the cable. Do not extend the mains
cable beyond the RED mark which indicates the maximum length.
2. Press the ON/OFF button on the top of the vacuum cleaner to turn it on.
3. To move the vacuum cleaner from room to room, you can unplug and carry it by either the handle or the
handgrip. Never use the mains cable to pull the vacuum cleaner.

Powering Off and Storage

1. Press the ON/OFF button on the top of the vacuum cleaner
to turn it off and then remove the mains plug from the mains
socket.
2. Press the cord rewind button to rewind the retractable mains
cable.
3. Put the vacuum cleaner in an upright position and attach the
telescopic tube to the clip on the vacuum cleaner.
8