GET RPM DASH Guia página 7

D. SYMBOLS AND CERTIFICATIONS
Athena s.p.a. declares herewith that GET RPM DASH complies with the
essential requirements of Directive 2014/53/EU. The complete text of the
Directive is available online: https://shop.athena.eu/node/38
Contains FCC ID: FCCTR_177882_0
NOTICE: This device complies with FCC Operation Cfr 47 part 15 – Subpart
B - §15.107, §15.109. Its use is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any received interference, including interference that may
cause undesired operation of the device.
NOTICE: Changes or modifications made to this equipment not expressly approved
by Athena S.p.A. may void the FCC authorization to operate this equipment.
NOTICE: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference; in this case the user will be required to correct the interference
at his own expense.
EN
12
E. DISPOSAL
Pursuant to art. 26 of Legislative Decree no. 49 of 14 March 2014,
"Implementation of Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE)".
The crossed-out wheelie bin symbol displayed on a product or its packaging indicates
that when the equipment reaches the end of its life cycle it must be disposed of
separately from other waste for purposes of treatment and recycling.
Once such products reach the end of their life cycle, users may dispose of them
free of charge at special municipal centres for the collection of waste electrical and
electronic equipment, or return them to the distributor under one of the following
arrangements:
- very small products, i.e. equipment with no external dimension exceeding 25
cm, may be returned with no obligation to buy to distributors whose sales areas
dedicated to electrical and electronic equipment exceed 400 m2. Distributors with
smaller sales areas are not obliged to participate in this scheme.
- products of dimensions greater than 25 cm may be returned to distributors under
a "one for one" arrangement, i.e. the distributor is only obliged to receive the product
in return for the purchase of a new, equivalent product, with one new product being
purchased for every waste product returned.
The separate collection and subsequent processing of products for purposes of
recycling, treatment and environmentally sound disposal helps avoid potentially
harmful effects on the environment and human health, and facilitates the reuse/
recycling of the materials contained in the products.
Users abusively disposing of products are subject to the penalties applicable under
the respective legislation.
13
EN