205 User Parameters - Best Power UNITY/I UT310 Manual Del Usuario

When two keys are shown, press them at the same time.
Keys

205 User Parameters

User parameters allow you to define some of the information the UPS uses to operate. You can
view and program the parameters listed in Table 3 on the next page. The parameters are easy to
access and program; simply follow the five steps below. Make sure that you fully understand
a parameter before attempting to change it. If you need help, phone BEST's Worldwide
Service or the nearest BEST office. (See the beginning of this manual for addresses and
telephone numbers.)
1. Press
2. Press
3. To switch a parameter "ON," press
4. To switch a parameter "OFF," press
5. To exit the parameter list, press
Sample Display
50 Hz Models Only: 50 Hz Models Only.
Mains 2. voltage
385 385 385
Battery temp.


25 C
Output peak curr
19 19 19 Aac
Normal operation
load power xx%
95.12.16
10.22.13 UTC
to display the user parameter list.
or to scroll through the list.
What the Display Means
Bypass mains voltage is 3 x 385 VAC (if
the bypass mains option is installed).
Battery temperature is 25 C (77
F)
(This display is only for units with battery
temperature compensation. Battery tem-perature
compensation is standard for UT310-UT330 models
with internal batteries and is optional for all units
with external batteries.)
Output peak current is 3 x 19 AAC.
Returns to "Normal operation"
display and indicates the % load of
the most fully loaded phase (leg).
Year, month, day.
Hour, minute, second. UTC = Universal
Time Coordination. (This may be
programmed to your time.)
.
.
.
11