Faucet Installation - Kohler K-10433 Guia De Instalacion

Escutcheon for
Three-Hole Sinks
Undercover
Ring
Screw

1. Faucet Installation

For One-Hole Sinks
Use the appropriate gasket (provided).
For Three-Hole Sinks
Apply plumbers putty or other sealant to the bottom edges of the
undercover according to the manufacturer's instructions.
Place the undercover over the sink holes.
Align and press the undercover in place.
Remove any excess putty.
Place the escutcheon over the undercover.
For All Sinks
Partially thread two screws into the threaded ring until the
screws barely protrude from the backside of the threaded ring.
Fit the faucet through the hole in the sink.
Slide the fiber washer, metal washer and ring to the threaded
shank until the ring is about 1/4" (6 mm) away from the sink
bottom.
Turn the ring so the screws are to the front and back.
Use a Phillips screwdriver to tighten the screws securely and
evenly.
Kohler Co.
Escutcheon for
One-Hole Sinks
O-Ring
Sink
Fiber
Washer
Metal
Washer
3
Faucet
1041080-2-C