en
1.
3.
5.
7.
TAS55.indb 23
2.
4.
6.
4!x
1.! Open the brewing unit by lifting the
handle (4a) and then pushing the
brewing unit up.
2.! Place the Service T DISC (6a) on the
T DISC holder (4b) with the barcode
facing down.
Make sure that the l ap of the T DISC is
centred in the slot in the front.
3.! Close the brewing unit by i rst bringing
it down.
4.! Then push the handle (4a) i rmly to the
machine, until you hear an audible click.
5.! Press the Start / Stop button (2) to start
the cleaning process.
6.! When the cleaning process is complete,
empty the cup and return it under the
drink outlet.
! ! Important:
– Please!complete!steps!5!and!6!four!
times!to!ensure!the!machine!is!
cleaned!and!prepared!for!the!next!
steps.
7.! Open the brewing unit, remove the
Service T DISC and store it in the
compartment (6) at the back of the
machine.
The next step involves installing the
►
BRITA MAXTRA water i lter system that
came with your machine. Please follow
the instructions on the next pages.
23
09/2011
26.08.2011 10:38:12