Resetting To The Factory Default Settings - Axis 225FD Guia De Instalacion

Page 16
Accessing the AXIS 225FD from the Internet
Once installed, your AXIS 225FD is accessible on your local network (LAN).
To access the camera from the Internet, network routers must be configured
to allow incoming traffic, which is usually done on a specific port. Please
refer to the documentation for your router for further instructions.
For more information on this and other topics, please visit the Axis Support
Web at www.axis.com/techsup

Resetting to the Factory Default Settings

This will reset all parameters, including the IP address, to the Factory Default
settings:
1. Disconnect power from the camera.
2. Press and hold the Control button and reconnect power.
3. Keep the control button pressed until the Power Indicator flashes amber
(this may take up to 15 seconds).
4. Release the control button.
5. When the Power Indicator displays green (which can take up to 1 minute)
the process is complete and the camera has been reset.
6. Re-install the AXIS 225FD using one of the methods described in this
document.
More information
Please refer to the help files and the user's manual for information on the
functionality of the AXIS 225FD. The AXIS 225FD User's Manual is available
from the Axis Web site at http://www.axis.com or from the Axis Installation
CD.
AXIS 225FD Installation Guide