Philips Sonicare Advance 4000 Serie Manual Del Usuario página 9

C
1
2
4
3
C
Using the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces Sonicare's effectiveness in removing
plaque.
The Easy-start feature should be deactivated when Sonicare is used in
clinical trials.
Smartimer\ 2-minute timer
All Sonicare models come with the Smartimer feature, which
automatically sets the brushing time to the 2 minutes
recommended by dental professionals.
If you wish to pause or stop brushing during your 2-minute cycle,
press the power button. Press the power button again and the
Smartimer will pick up where you left off.
The Smartimer will automatically reset to the beginning of a 2-
minute cycle if:
- brushing is paused for 45 seconds or longer;
- the handle is returned to the charger base.
Quadpacer\ 30-second interval timer (available on select
models).
Quadpacer makes sure that you brush all sections of your mouth
evenly and thoroughly.At 30, 60 and 90 seconds, you will hear a
short beep and a pause in brushing action.This is your signal to
move to the next section of your mouth.
Recharge indicator battery charge status (available on
select models).
If your Sonicare has a low charge, you will hear 5 beeps after you
have brushed your teeth for 2 minutes and the power button light
will flash rapidly.
When you hear the low charge indication, you have 3 or fewer 2-
minute brushings left.
1 Place the handle in the charger base (with the Sonicare logo
facing towards you) to begin the recharging process.
The power button light flashes slowly when the handle is in the
charger base to signal charging is in progress.
When the Sonicare is fully charged, the power button light is
constantly on (not flashing), signalling that your Sonicare is ready
for use.
When not in use, keep your Sonicare in the charger base to maintain a
full battery charge.
ENGLISH
9