Description Of The Symbols - Lea LE32400-40A Instrucciones Originales

Maximum shaft brake power of the engine
A-weighted sound pressure level at the
operator position according to ISO 22868 .
A-weighted emission sound power level
according to noise directive 2000/14/EC
Vibration emission levels according to ISO
22867
Type of the engine
Noise Information
Measured sound values determined according to ISO 22868.
The noise figures quoted are emission levels and are not necessarily safe working levels.
Whilst there is a correlation between the emission and exposure levels, this cannot be used
reliably to determine whether or not further precautions are required. Factors that influence the
actual level of exposure of work-force include the characteristics of the work room, the other
sources of noise, etc. i.e. the number of machines and other adjacent processes, and the length
of time for which an operator is exposed to the noise. Also the permissible exposure level can
vary from country. This information, however, will enable the user of the machine to make a
better evaluation of the hazard and risk.
Wear hearing protection
Vibration total values (triax vector sum) determined according to ISO 22867:
The vibration emission level given in this information sheet has been measured in accordance
with a standardized test given in ISO 22867:2003 and may be used to
compare one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if
the tool is used for different applications, with different accessories or poorly maintained, the
vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when
the tool is switched off or when it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as:
maintain the tool and the accessories, keep the hands warm, organization of work patterns.

DESCRIPTION OF THE SYMBOLS

The use of symbols in this manual is intended to draw your attention to possible risks. The
safety symbols and the explanations that accompany them must be perfectly understood. The
warnings in themselves do not remove the risks and cannot replace correct actions for
preventing accidents.
1,3kW
LpA: 96,7 dB(A) K=3,0 dB(A)
LwA:106,6 dB(A) K=3,0 dB(A)
a : 8,010 m/s
front_ hv,eq
a : 6,354m/s
rear _hv,eq
1E41F
35
K=1,5 m/s
2 2
K=1,5 m/s
2 2