Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Connecting your equipment
• 3D, Deep Color, x.v.Color signal transfer and Audio
Return Channel are only possible when connected to a
compatible component.
• HDMI format digital audio transmissions require a longer
time to be recognized. Due to this, interruption in the
audio may occur when switching between audio formats
or beginning playback.
• Turning on/off the device connected to this unit's HDMI
OUT terminal during playback, or disconnecting/
connecting the HDMI cable during playback, may cause
noise or interrupted audio.
HDMI, the HDMI Logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC in the United States and other countries.
"x.v.Color" and
are trademarks of Sony
Corporation.
Analog audio cables
Use stereo RCA phono cables to connect analog audio
components. These cables are typically red and white, and
you should connect the red plugs to R (right) terminals and
white plugs to L (left) terminals.
L
White (Left)
A U D
R
Red (Right)
Digital audio cables
Commercially available coaxial digital audio cables or optical
cables should be used to connect digital components to this
receiver.
C O A
X I A
L
Coaxial digital
I N
O P T
audio cable
Optical cable
Note
• When connecting optical cables, be careful when
inserting the plug not to damage the shutter protecting
the optical socket.
• When storing optical cable, coil loosely. The cable may be
damaged if bent around sharp corners.
• You can also use a standard RCA video cable for coaxial
digital connections.
Video cables
Standard RCA video cables
These cables are the most common type of video connection
and are used to connect to the composite video terminals.
The yellow plugs distinguish them from cables for audio.
Component video cables
Use component video cables to get the best possible color
reproduction of your video source. The color signal of the TV
is divided into the luminance (Y) signal and the color (P
P
) signals and then output. In this way, interference between
R
I O
the signals is avoided.
Green (Y)
I C A
L
I N
V I D
E O
Yellow
and
B
C O
M P
O N
E N
Y
T V
I D E
P
O
B
P
R
Blue (P
)
B
Red (P
)
R
About video outputs connection
This receiver is not loaded with a video converter. When you
use component video cables or HDMI cables for connecting
to the input device, the same cables should be used for
connecting to the TV.
The signals input from the analog (composite and
component) video inputs of this unit will not be output from
the HDMI OUT.
Playback
component
Terminal for connection with source device
IN
IN
Y
P
P
B
R
HDMI
COMPONENT VIDEO
OUT
MONITOR
OUT
Y
P
P
B
R
HDMI
COMPONENT VIDEO
Terminal for connection with TV monitor
The OSD will
not appear.
Video signals can be output.
02
02
IN
VIDEO
MONITOR
OUT
VIDEO
TV
13
En
Capítulos
Tabla de contenido
Solución de problemas
