The System And The Other Setup; Making Receiver Settings From The System Setup Menu; Manual Speaker Setup - Pioneer VSX-1020 Manual De Instrucciones

The system and the other setup

Chapter 11:
The system and the other setup
Making receiver settings from
the System Setup menu
The following section describes how to change
the speaker-related settings manually and
make various other settings (input selection,
OSD language selection, etc.).
1 Switch on the receiver and your TV.
Use the  RECEIVER button to switch on.
• If headphones are connected to the
receiver, disconnect them.
2 Press RECEIVER , then press HOME MENU.
A Graphical User Interface (GUI) screen
appears on your TV. Use /// and
ENTER to navigate through the screens and
select menu items. Press RETURN to confirm
and exit the current menu.
• Press HOME MENU at any time to exit the
HOME MENU.
3 Select 'System Setup' from the HOME
MENU, then press ENTER.
4 Select the setting you want to adjust.
• Manual SP Setup – Sets the type of
connection used for surround back
terminals and the size, number distance
and overall balance of the connected
speakers (see Manual speaker setup below).
• Input Setup – Specifies what you've
connected to the digital, HDMI and
component video inputs (see The Input
Setup menu on page 40).
• OSD Language – The GUI screen's display
language can be changed (see Changing
the OSD display language (OSD Language)
on page 37).
Note
1 Make sure not to switch off the power when using the System Setup menu.
• Network Setup – Conducts the setup
necessary to connect this unit to the
network (see Network Setup menu on
page 103).
• Other Setup – Changes customized
settings to reflect how you are using the
receiver (see The Other Setup menu on
page 105).
1

Manual speaker setup

This receiver allows you to make detailed
settings to optimize the surround sound
performance. You only need to make these
settings once (unless you change the
placement of your current speaker system or
add new speakers).
These settings are designed to customize your
system, but if you're satisfied with the settings
made in Automatically setting up for surround
sound (Auto MCACC) on page 37, it isn't
necessary to make all of these settings.
CAUTION
• The test tones used in the Manual SP Setup
are output at high volume.
1 Select 'Manual SP Setup', then press
ENTER.
See Making receiver settings from the System
Setup menu above if you're not already at this
screen.
2 Select the setting you want to adjust.
If you are doing this for the first time, you may
want to adjust these settings in order:
• Speaker System – Specifies how you are
using the B speaker terminals (see below).
11
99
En