Tabla de contenido
Idiomas disponibles
Idiomas disponibles
WARNING! Risk of burns! Do not touch the hot
nozzle nor the hot parts of the tool. Wear protective
gloves.
RESIDUAL RISKS
Additional residual risks may arise when using the tool
which may not be included in the enclosed safety warnings.
These risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks cannot be avoided. These include:
♦ Injuries caused by touching any rotating/moving parts.
♦ Injuries caused when changing any parts, blades or
accessories.
♦ Injuries caused by prolonged use of a tool. When using
any tool for prolonged periods ensure you take regular
breaks.
♦ Impairment of hearing.
♦ Health hazards caused by breathing dust developed
when using your tool (example: working with wood,
especially oak, beech and MDF.)
STORAGE RECOMMENDATIONS
1. The best storage place is one that is cool and dry away
from direct sunlight and excess heat or cold.
2. Long storage will not harm the battery pack or charger.
PERSONAL SAFETY
♦ No children or pregnant women should enter the work
rea where the paint sanding is being done until all
cleanup is completed.
♦ A dust mask or respirator should be worn by all persons
entering the work area. The filter should be replaced
daily or whenever the wearer has difficulty breathing.
Note: only those dust masks suitable for working with lead
paint dust and fumes should be used. Ordinary painting
masks do not offer this protection. See your local hardware
dealer for the NIOSH approved proper mask.
LABELS ON TOOL
The label on your tool may include the following symbols:
WARNING! To reduce the risk of injury, the user
must read the instruction manual before use.
Wear ear protection.
Wear safety glasses or goggles.
Lock / to tighten or secure.
Unlock / to loosen.
Wear protective gloves.
Wear a dust mask.
Wear protective protective, slipresistant
footwear.
Switch the product off and disconnect it from
the power supply before assembly, cleaning,
adjustments, maintenance, storage and
transportation.
V
Volts
A
Amperes
Hz
Hertz
W
Watts
min
minutes
Alternating
/min.
Current
Position of Date Code (Fig. A)
The Date Code, which also includes the year of manufacture,
is printed into the housing.
Example:
2017 XX JN
Year of manufacturing
PACKAGE CONTENTS
The package contains:
1 Plastic Welding Machine
1 Instruction Manual
♦ Check for damage to the tool, parts or accessories
which may have occurred during transport.
♦ Take the time to thoroughly read and understand this
manual prior to operation.
FEATURES (FIG. A)
This tool includes some or all of the following features.
1. Handle
2. Thermostat knob
3. Power indicator
4. Heating element
5. Stand
6. Heating sockets
7. Wrench
8. Scissors
9. Screw
ENGLISH (
Original Instructions)
Direct Current
n
No-Load Speed
0
Earthing Terminal
Safety Alert Symbol
Revolutions or
Reciprocation per
minute
11
Tabla de contenido
