Using The Carrycot - Foppapedretti MYO Manual De Instrucciones

Tabla de contenido
Handle adjustment [ fig. 1]
Press the buttons at the side and adjust the handle into the new position, release the buttons and check
that the handle is locked in place.
Assembling the hood [ fig. 2 - fig.3]
Line up the pins of the hood and insert them into the slots at the side of the carrycot.
Press downwards, a click indicates the hood has been secured in place.
To remove the hood, press the lower part of the hood securing pin and at the same time remove the
hood from its slot.
Backrest adjustment [ fig. 4, fig.5]
To lift or recline the carrycot backrest, press and adjust the lever into the new position.
Make sure the backrest has been secured correctly in place, in the chosen position.
Rocking system [ fig. 6]
Two supporting feet are located in the base; fold them both out to prevent the rocking movement, open
both of the feet inwards to allow the rocking movement.
Both feet must be folded inwards or opened outwards.
Hood adjustment [ fig. 7]
Lower or lift the hood to achieve the required position.
Ventilation [ fig. 8]
Open the zip or the viewing window, according to the model purchased, to ventilate the inside of the
carrycot.
Internal ventilation
It is possible to adjust internal ventilation by using the lever (A)
Cover [ fig. 9]
Fit the cover on the carrycot using the press fasteners.
Read the instructions carefully before use and keep for future reference.
Your baby's safety may be at risk unless these instructions are followed carefully.
WARNING: YOU ARE RESPONSIBLE FOR YOUR BABY'S SAFETY.
WARNING: Never leave child unattended. Always keep baby under supervision when he is in the
carrycot.
WARNING: : This product is suitable for a child who can not sit up unaided, roll over and can not
push itself up on its hands and knees. Maxmium weight of the child: 9Kg.
WARNING: Suitable for children under 6 months of age.
WARNING: For newborn babies, do not regulate the backrest in the vertical sitting position (it
should be set in the lie flat position) as baby is unable to keep his head upright at this age.
WARNING: Make sure that all the locking devices have been fastened correctly before use.
WARNING: Do not use an additional mattress with a thickness of more than 25 mm.
Do not use spare parts or accessories other than those supplied or approved by the manufacturer,
as they may make the product unsafe.
Make sure that everyone using the product is familiar with how it works.

USING THE CARRYCOT

WARNINGS
9
PRAM
GB

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Pram myo

Tabla de contenido