Operating Instructions - Nexgrill 840-0005 Guia Del Propietario

GAS HOOK-UP
Only the pressure regulator and hose assembly supplied with the appliance should be used. Any
replacement pressure regulator and hose assembly must be specified by the appliance manufacturer. This
grill is configured for liquid propane. Do not use a natural gas supply.
Total gas consumption (per hour): 38,000 BTU
The installation of this appliance must conform with local codes or, in the absence of local codes, with either
the National Fuel Gas Code, ANSI Z223.1/NFPA 54, National Gas Propane Installation Code, CSA B149.1,
or Propane Storage and Handling Code.
LIQUID PROPANE CYLINDER REQUIREMENTS
The LP tank used with your appliance must meet the following requirements:
• Purchase LP tanks only with these required measurements: 12"(30.5cm)(diameter) x 18"(45.7cm)(tall)
with 20lb. (9kg) capacity maximum.
• The LP-gas supply cylinder to be used must be constructed and marked in accordance with the
specifications for LP-gas cylinders of the US Department of Transportation (DOT) or the National
Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for the Transportation of
Dangerous Goods.
CAUTION: Use cylinders that are marked "Propane Fuel" only.
LP TANK VALVE REQUIREMENTS
LP tank valve must have:
• Type 1 outlet compatible with regulator or appliance.
• Safety relief valve.
• UL listed Overfill Protection Device (OPD). This OPD safety feature is identified by a unique triangular
hand wheel. Use only tanks equipped with this type of valve.
• LP tank must be arranged for vapor withdrawal and include collar to protect LP tank valve.
CONNECTING THE LIQUID PROPANE CYLINDER
To connect the liquid propane gas supply cylinder:
The cylinder valve should be in the "OFF" position. If not, turn the valve clockwise until it stops.
Make sure the cylinder valve has the proper type-1 external male thread connections per ANSI Z21.81.
Make sure the burner valves are in the "OFF" position.
Inspect the valve connections, port and regulator assembly. Remove debris and inspect the hose for
damage.
When connecting the regulator assembly to the valve, use your hand to tighten the nut clockwise until it
stops. Use of a wrench could damage the quick-coupling nut and result in a hazardous situation
Open the cylinder valve fully by turning the valve counterclockwise.
Before lighting the grill, use a soap and water solution to check all the connections for leaks.
If a leak is found, turn the cylinder valve "OFF" and do not use the grill until a local liquid propane dealer can
make repairs.
Never attempt to use damaged or obstructed equipment. See your local liquid propane dealer for repair.

Operating instructions

21