Drx-Frozen Slave - GPE Vendors DRX Manual Tecnico

GB

DRX-FROZEN SLAVE

52
GENERAL CHARACTERISTICS
The DRX-FROZEN is an automatic distributor of frozen products.
It works only in union with a Master GPE such as the DRX range
withLogic board RVM72 (graphic blue display).
The machine has two doors, one external and one internal.
The opening of the external door stops the fan positioned inside
the freezer.
To work in safety it is necessary to turn off the main switch with
red light present on the control panel.
CONNECTION TO THE MASTER MACHINE
To connect the DRX-FROZEN to the Master machine it is necessary
to remove the grill to the lower back of the Master. Internally on
the grill there is a small printed circuit with a 26 pin connector
into which the cable from the DRX-FROZEN must be inserted.
SET-UP OF THE THERMOSTAT TEMPERATURE
To set-up the thermostat temperature operate in the following
way:
• Press the SET button twice consecutively • Press the UP and DOWN
temperature
• Exit from the function pressing the FNC key twice
consecutively
DEFROST PROCEDURE
The Defrost procedure is automatically activated every 4 hours.
buttons to set the required