Hanging The Fan; Making The Electrical Connections - HAMPTON BAY Clarkston El Manual Del Propietario

4.Hanging the Fan

REMEMBER to turn off the power. Follow the
steps below to hang your fan properly:
Step 1. Attach the mounting bracket to the
outlet box with two screws and washers
provided with the outlet box. Make sure the
bracket is tight and secured. (Figure 4)
Step 2. Lift fan into position by hanging the
motor assembly onto the hook from the ceiling
mounting bracket allowing it to hang freely.
(Figure 5)
Outlet box
Mounting bracket
Figure 4
Mounting plate
Motor
Figure 5
5.Making the Electrical
Connections
WARNING
TO AVOID POSSIBLE ELECTRICAL SHOCK, BE
SURE ELECTRICITY IS TURNED OFF AT THE
CIRCUIT BREAKER OR MAIN FUSE BOX
BEFORE WIRING.
Follow the steps below to connect the fan to your
house supply wires. Secure the wire nuts supplied
with your fan by wrapping the connections with
Washer
electrical tape.
Screw
Step 1. Connect the Black (hot) wire from the
ceiling to the black and blue wires from the fan.
Connect the white (neutral) wire from the ceiling
to the white wire from the fan. (Figure 6)
Step 2. If your outlet box has a ground wire (green
or bare copper) connect the fan ground wire to it.
If your outlet box does not have a ground wire, the
connect the fans and mounting bracket wire
together. Secure wire connection with the plastic
wire nuts provided.
Step 3. Figures 7 and 8 illustrate the wiring
connections for optional wall control (available at
your Hampton Bay Retailer, the wire color out of
wall control' s installation manual for correct
wire connections).
4