Ryobi DUALCLEAN RPW105DM Manual De Utilización página 17

EN
FR DE ES IT PT
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
CAUTION:
SERVICE
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. For service we suggest you return the product
to the nearest AUTHORIZED SERVICE CENTRE for
repair. When servicing, use only identical replacement
parts.
WARNING:
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly and
understand completely the operator's manual.
If you do not under stand the warnings and
instructions in the operator's manual, do not use
this product. Call Ryobi customer service for
assistance.
WARNING:
The operation of any power tool can result in
foreign objects being thrown into your eyes,
which can result in severe eye damage. Before
beginning power tool operation, always wear
safety goggles or safety glasses with side
shields and, when needed, a full face shield.
SAVE THESE INSTRUCTIONS
ELECTRICAL
DOUBLE INSULATION
Double insulation means that exposed metal parts are
isolated from the internal metal motor components with
protecting insulation. Double insulated products do not
need to be grounded.
WARNING:
The double insulated system is intended to protect
RPW105DM 25lgs.indd 14 RPW105DM 25lgs.indd 14
NL SV DA NO FI HU CS RU
English(Original instructions)
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result in
death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in
death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in prop erty
damage.
NOTE: Servicing of a product with double insulation
requires extreme care and knowledge of the system
and should be performed only by a qualified service
technician. For service, we suggest you return the
product to your nearest authorized service centre for
repair. Always use original factory replace ment parts
when servicing.
ELECTRICAL CONNECTION
This product has a precision-built electric motor. It should
be connected to a power supply that is 220-240 volts,
50 Hz, AC only (normal household current). Do not
operate this product on direct current (DC). A substantial
voltage drop will cause a loss of power and the motor will
overheat. If the product does not operate when plugged
into an outlet, double-check the power supply.
EXTENSION CORDS
See Figure 1.
The cross-section of any extension cables used must be
proportional to their length, i.e. the longer the extension
cable, the greater the cross-section; cables with a
protection level of "IPX5" must be used.
Use the chart to determine the minimum wire size
required in an extension cord.
Motor
14
RO PL SL HR ET
the user from shock resulting from a break in the
product's internal insulation. Observe all normal
safety precautions to avoid electrical shock.
E x t e n s i o n
Voltage cable up to
25m
section
220-240v
3 x 1.5mm²
LT LV SK BG
E x t e n s i o n
cable up to
50m
section
3 x 2.5mm²
2009/12/11 2009/12/11 3:49 3:49