For Models With Water Dispenser - Beko GN1306220VZDX Manual De Usuario

Ocultar thumbs Ver también para GN1306220VZDX:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Important instructions for safety and environment
relocating the product, do not
pull by holding the door handle.
The handle may come off.
Take care to avoid trapping any
part of your hands or body in
any of the moving parts inside
the product.
Do not step or lean on the door,
drawers and similar parts of
the refrigerator. This will cause
the product to fall down and
cause damage to the parts.
Take care not to trap the power
cable.
1.1.1 HC warning
If the product comprises a cooling
system using R600a gas, take
care to avoid damaging the
cooling system and its pipe while
using and moving the product.
This gas is flammable. If the
cooling system is damaged, keep
the product away from sources
of fire and ventilate the room
immediately.
The label on the inner left
C
side indicates the type of
gas used in the product.
1.1.2 For models with
water dispenser
Pressure for cold water inlet
shall be maximum 90 psi (6.2
bar). If your water pressure
exceeds 80 psi (5.5 bar), use a
pressure limiting valve in your
mains system. If you do not
know how to check your water
pressure, ask for the help of a
professional plumber.
If there is risk of water hammer
effect in your installation,
always use a water hammer
prevention equipment in
your installation. Consult
Professional plumbers if you
are not sure that there is no
water hammer effect in your
installation.
Do not install on the hot water
inlet. Take precautions against
of the risk of freezing of the
hoses. Water temperature
operating interval shall be 33°F
(0.6°C) minimum and 100°F
(38°C) maximum.
Use drinking water only.
1.2. Intended use
This product is designed for
home use. It is not intended for
commercial use.
The product should be used to
store food and beverages only.
5 / 38 EN
Refrigerator / User Manual

Capítulos

Tabla de contenido
loading

Tabla de contenido